Blenders for ingredients mixing
Equipment features:
| Model | Volume | Power |
| DP-LDH500 | 500L | 4KW |
| DP-LDH1000 | 1000L | 7.5KW |
| DP-LDH1500 | 1500L | 11KW |
| DP-LDH2000 | 2000L | 11-15KW |
Horizontal ribbon belt mixer’s main structure is made of barrel, mixing device, driving device and other auxiliary devices (sealing device, fixed device, optional electrical control system devices, etc.) combined, equipment for mixing materials is mainly motor through the speed reducer, coupling drives the mixing device screw stirring shaft and screw belt to rotate together, screw stirring device in the mixing process on the one hand, make the material up and down, on the other hand, due to the structural characteristics of the screw to produce internal and external convection of the material, so that the up and down movement to achieve the purpose of fully mixing the material. On the other hand, due to the structural characteristics of the screw strip so that the material produces internal and external convection, so that the up and down, left and right movement of the material to achieve the purpose of full mixing.Horizontal screw belt mixer belongs to active mixing when mixing, that is to say, the material is driven by the double-layer stirring screw belt structure to carry out mandatory movement, friction, movement and mixing. First of all, the material in the mixing screw belt driven by the overall up and down roll, so that the whole barrel material with the mixer’s operating rules for the overall rotation of the rules; Secondly, because of the special angle of the structure of the screw belt, so that the barrel peripheral material with the outer layer of the barrel belt to the centre of the barrel movement, while the barrel centre of the material through the inner layer of the screw belt to the material out of the push, the movement of the whole barrel of the material through the mutual extrusion friction collision to achieve full mixing This way of movement makes the inner and outer materials of the whole barrel reach the purpose of full mixing through mutual extrusion and friction collision.
1, a wide range of applications, can be solid a solid (powder a powder) mixed, solid a liquid (powder a liquid) mixed, liquid a liquid mixed.
2, high uniformity of mixing: can make 1:10000 times the ratio of uniformly mixed materials, especially for the specific gravity of the material mixing characteristics of the larger more obvious advantages.
3, mixing speed, high efficiency. Than other mixing machine efficiency increased 6-10 times or higher.
4, fast and convenient discharge, usually 2 to 5 minutes out of a batch of material.
5, the mixing process is gentle, basically does not destroy the original state of the material.
6, no pollution to the material, the mixing mechanism of the equipment is integral, safe and reliable, all the edges of the weld seam smooth transition, easy to clean; lubrication parts are outside the barrel, no oil dripping and abrasive materials penetrate into the material, can be sealed operation, isolated from the dust in the air into the material.
7、Small energy consumption, large loading coefficient.
8、Low requirements for the plant, the equipment is horizontal, and various forms of driving device and discharge position can be chosen at will, not subject to the height of the plant, covers an area of constraints.
9, the equipment runs smoothly and reliably, less wearing parts, long service life, easy maintenance and simple operation.
P, D
We are professional manufacture of food extruding production lines, covering the manufactuing, research and development of the extruders, fryers, oven/dryers, seasoning machiness, conveyors and PLC control system. Jinan Eagle Food Machinery Co., LTD located in industry city--Jinan city, capital of Shandong province.
